For modern commercial buildings with exterior curtain wall systems, the load of the curtain wall support brackets is a key factor that the inner wall structure must bear. Many traditional lightweight wall panels are not strong enough to fix these heavy brackets, forcing contractors to add extra hidden steel frames behind the wall, which increases a lot of material and labor cost. The high load bearing performance of EPS Cement Sandwich Panel allows you to fix curtain wall brackets directly on it, completely eliminating the need for extra steel structure.
When you design the curtain wall system, you can pre-mark the exact positions of all curtain wall support brackets on the EPS Cement Sandwich Panel in the factory. The manufacturer can embed extra high strength fiber reinforced blocks inside the panel at these corresponding positions, to further enhance the local load bearing capacity. On the construction site, you can drill holes directly through the panel and drive long heavy-duty anchor bolts to fix the curtain wall brackets. Tests show that each fixed point on the panel can safely support more than 150kg of static load, which is enough for most glass curtain wall and aluminum sheet curtain wall systems. You can also cut hidden slots on the panel to lay the lightning protection wires and curtain wall maintenance equipment power lines, hiding all the messy wires completely inside the wall. This installation method simplifies the whole curtain wall construction process, cuts the total curtain wall installation time by more than 30%, and reduces the overall curtain wall project cost significantly.
